颗粒肥料离散元仿真摩擦因数标定方法研究

对分体圆筒法、倾斜法、抽板法和斜面法4种颗粒特性测试方法进行Plackett-Burman多因素显著性筛选试验,试验方差分析结果表明,不同的测试方法影响测量结果的显著因素与因素显著程度。根据分体圆筒法、倾斜法和斜面法的方差分析结果,提出一种基于颗粒物料整体特性的摩擦因数标定方法,将仿真试验与真实试验相结合,依次标定出尿素颗粒与PVC材料间静摩擦因数为0. 41,颗粒间静摩擦因数为0. 36,颗粒间滚动摩擦因数为0. 15。将所标定的摩擦因数采用无底圆筒法进行验证试验,休止角仿真试验结果为30. 57°,真实试验结果为31. 74°,相对误差为3. 69%,不同含水率下的实际试验休止角与所标定摩擦因数下的仿真休止角相对误差均不大于4. 59%,仿真试验结果与真实试验结果无显著差异,验证了所标定摩擦因数的有效性。本方法可用于其他颗粒状物料间摩擦因数的标定试验。     

橡胶树优树无性系自然越冬过程生理指标变化研究

以橡胶树5个人工杂交子代优树无性系苗木为材料，通过自然越冬低温处理，以抗寒品种GT1为对照，测定了5个时间梯度下10个生理指标的变化过程，并利用隶属函数法对各无性系抗寒性进行综合评价。结果表明，整个自然越冬过程中各无性系间相对含水量、相对电导率、超氧化物歧化酶（SOD）和过氧化物酶（POD）活性、超氧阴离子（OFR）、氨基酸（AA）、脯氨酸（Pro）、可溶性糖及可溶性蛋白含量等生理指标差异均达到了极显著（P<0.01）水平；温度较高时各无性系间丙二醛（MDA）含量差异未达到显著水平。自然越冬过程中，各生理指标呈现不同的变化规律，其中相对含水量和脯氨酸含量呈先降后升变化，SOD、POD酶活性及可溶性蛋白含量呈“升—降—升”变化，相对电导率、MDA和可溶性糖含量呈“降—升—降”变化、OFR含量呈先升后降、AA含量呈“降—升—降—升”变化。各无性系间抗寒性差异较明显，应用隶属函数法综合评价抗寒性由强到弱依次为629号＞626号＞182号＞223号＞GT1（对照）＞628号。     

木材及木基材料吸湿尺寸稳定性检测方法研究

为实现木材及木基材料吸湿尺寸稳定性横向比较,规范其检测方法,依据现有相关检测标准,借鉴日本工业木材吸湿尺寸稳定性检测方法,结合木质材料特性以及我国的具体情况,提出一种木材及木基材料吸湿尺寸稳定性的检测方法,即以温度20℃、相对湿度65%条件下的材料尺寸为基准,测定在温度40℃、相对湿度为75%和90%的两种吸湿环境条件下的材料尺寸变化。通过该方法对柚木、印茄木、朴木3种不同尺寸的木材和对多层材料、高密度纤维板、普通刨花板3种木基材料的吸湿尺寸稳定性进行测定,以评价该方法的适用性和可行性。结果表明:木材与木基材料试样不超过12 d即可达到吸湿平衡,不同材料尺寸变化率、湿胀系数的大小关系也与实际情况一致。因此木材与木基材料试样均适于用该方法。     

蔬菜中农药残留检测方法变更的验证方法探析

检测标准发生变更时,检验检测机构应做好新方法的验证工作。以水果和蔬菜中阿维菌素残留量测定标准变更为实例,详述了如何开展方法验证,以期为大家开展化学分析方法发生变更时的验证工作提供参考。     

油菜高光效种质综合鉴选指标体系与方法

高光效种质是开展作物高光效育种的基础。在剖析油菜高光效种质筛选要求、面临困难、研究缺陷的基础上,针对油菜超高产育种目标和生产实际需求,构建出油菜高光效的综合筛选指标体系和方法,对油菜种质进行数量化综合评价,并开展定向选育和杂交改良。在实际应用中取得良好效果,获得一批油菜高光效种质,为利用“高光效+杂种优势”途径开展油菜高光效育种奠定了物质基础。     

Age estimation of different tree species using a special kind of an electrically recording resistance drill

The determination of tree age is an important issue for urban green planning, forestry and dendrology; finding non-destructive and quasi-non-destructive methods for this purpose is of great theoretical and practical importance. The resistance drilling method is quasi-non-destructive because the average diameter of an opening that remains after drilling does not exceed 3 mm. Do electrically recording resistance drills allow precise assessment of tree age? The aim of this study is to assess the accuracy of determining the number of tree rings based on an examination of this special kind of drilling resistance profiles for three tree species, the pine Pinus sylvestris L., the oak Quercus robur L., and the birch Betula pendula ROTH. In 2015 and 2016, 15 pine trees, 15 oak trees, and 15 birch trees were randomly selected. For each studied tree, a measurement was conducted using the electrically recording resistance drill IML-Resi E400 with a flat-tipped 1.5/3 mm steel needle (research sample), and an increment core was taken (reference sample). The drill used was not a real Resistograph^®. The analysis of the E400-profiles underestimated the number of tree rings; the mean bias error (MBE) values were –6.5, –2.5, and –6.0 years for pine, oak, and birch, respectively. The proportion of investigated trees with less than five years difference between the research and reference samples varied from 38.4 (birch) to 66.7 (oak) percent. The accuracy of tree age determination was lowest for birch and highest for oak. The binomial generalised linear model (GLM) revealed that the most accurate tree age assessments were obtained from tree rings wider than 2 mm. The measurements clearly showed that the electrically recording resistance drill IML-Resi E400 enables a quick, although approximate, tree age assessment. Future research should concentrate on electronically regulating and recording drills, providing a higher spatial and signal resolution, and a stronger correlation to wood density.     

基于综合判别法的广东省水土流失状况遥感分析

以2009和2010年10 m分辨率的ALOS多光谱遥感影像为数据源,采用计算机自动分析与人机交互判别相结合的方法,对广东省水土流失状况进行了遥感分析。结果表明:广东省土地利用以林草地、水田、建筑用地、水域和旱地为主,植被覆盖状况良好,珠三角和粤西地区地形平缓,粤北山区地形起伏较大;全省水土流失总面积20945.87 km 2,其中自然侵蚀面积14781.06 km 2,人为侵蚀面积6164.81 km 2;全省水土流失以轻度和中度侵蚀为主,主要分布在河源、梅州和云浮等地,其中生产建设活动导致的人为侵蚀集中分布在惠州、清远和广州等地。     

Performance and uncertainty analysis of a short-term climate reconstruction based on multi-source data in the Tianshan Mountains region,China

Short-term climate reconstruction, i.e., the reproduction of short-term(several decades) historical climatic time series based on the relationship between observed data and available longer-term reference data in a certain area, can extend the length of climatic time series and offset the shortage of observations. This can be used to assess regional climate change over a much longer time scale. Based on monthly grid climate data from a Coupled Model Inter-comparison Project phase 5(CMIP5) dataset for the period of 1850–2000, the Climatic Research Unit(CRU) dataset for the period of 1901–2000 and the observed data from 53 meteorological stations located in the Tianshan Mountains region(TMR) of China during the period of 1961–2011, we calibrated and validated monthly average temperature(MAT) and monthly accumulated precipitation(MAP) in the TMR using the delta, physical scaling(SP) and artificial neural network(ANN) methods. Performance and uncertainty during the calibration(1971–1999) and verification(1961–1970) periods were assessed and compared using traditional performance indices and a revised set pair analysis(RSPA) method. The calibration and verification processes were subjected to various sources of uncertainty due to the influence of different reconstructed variables, different data sources, and/or different methods used. According to traditional performance indices, both the CRU and CMIP5 datasets resulted in satisfactory calibrated and verified MAT time series at 53 meteorological stations and MAP time series at 20 meteorological stations using the delta and SP methods for the period of 1961–1999. However, the results differed from those obtained by the RSPA method. This showed that the CRU dataset produced a low degree of uncertainty(positive connection degree) during the calibration and verification of MAT using the delta and SP methods compared to the CMIP5 dataset. Overall, the calibrated and verified MAP had a high degree of uncertainty(negative connection degree) regardless of the dataset or reconstruction method used. Therefore, the reconstructed time series of MAT for the period of 1850(or 1901)–1960 based on the CRU and CMIP5 datasets using the delta and SP methods could be used for further study. The results of this study will be useful for short-term(several decades) regional climate reconstruction and longer-term(100 a or more) assessments of regional climate change.     

不同运输条件对合浦珠母贝稚贝存活比较

比较运输方式及环境温度对合浦珠母贝稚贝运输中的存活影响,从而为稚贝运输过程中的运输方式、环境温度及运输时间的把握提供借鉴和参考。以3月龄稚贝为实验材料,运用无水干露、加水淹没及包装充氧等3种方式,分别在环境温度为5、13、21和29℃下模拟运输。每隔3 h从每组运输条件下取出1组实验贝,转移到正常养殖环境下暂养恢复,经48 h后统计其存活率。对运输时间与存活率之间进行非线性参数曲线拟合,计算每组运输条件下的致死时间(T_0)、半致死时间(T_(0.5))及全致死时间(T_1);运用双因素方差分析,Duncan氏方法比较3种运输方式及4种环境温度间的均值。结果显示:包装充氧优于其他两种运输方式,而加水淹没又优于无水干露;温度为13℃和21℃时优于其他2个环境温度,环境温度为17.60～20.05℃是稚贝运输的最佳温度。     

干制羊肉基因组DNA不同提取方法的比较

为了研究干制加工羊肉基因组DNA的最佳提取方法,本试验采用传统酚-氯仿法、磁珠法、改良CTAB法、离心柱法分别提取干制处理后的羊肉基因组DNA,并对4种方法提取的羊肉基因组DNA浓度、纯度、完整性以及提取所需时间、PCR扩增效果等进行比较。结果表明,采用磁珠法提取DNA的效果更好,DNA浓度为118.87 ng·μL^-1,A₂₆₀/A₂₈₀值为1.89,而且此方法具有提取时间短、效率高、污染小等特点。本研究结果为干制加工羊肉基因组DNA的大批量提取和检测提供了参考依据。